Больше не поддерживается вариант на python.

[weathermon.git] / weathermon.uci

diff --git a/weathermon.uci b/weathermon.uci
index 27631ac5a8d8978c4b0af25586e1222a1b8a66a5..7a4162fc338d1ece3b7c43dec3f03157a32ce345 100644 (file)
--- a/weathermon.uci
+++ b/weathermon.uci
@@ -1,13 +1,64 @@
 config internal 'web'
 config internal 'web'

-       option url http://estia.rvb-home.lan/meteo/send.php
+       option url http://url-to-submit-meteo-data

        option user meteo
        option user meteo

-       option password somestrictpassword
-       option iface eth0
+       option password some-password
+       option iface wlan0

 
 

-config internal 'serial'
-       option port /dev/ttyUSB0
-       option timeout 100
-       option baud 9600
+config internal 'input'
+       option exec "/usr/bin/stdbuf -o0 /usr/bin/lua /usr/bin/weathermon-iio"
+#      option port /dev/ttyATH0
+#      option timeout 100
+#      option baud 57600

 
 config internal 'logging'
 
 config internal 'logging'

-       option enabled on
+       option enabled off # on/stdout/syslog
+#      option touch_file /var/run/weathermon/weathermon.last
+
+config internal 'mqtt'
+        option host mqtt.host.name
+       option user meteo-user
+       option password some-password
+
+config internal 'alarm'
+#      option exec /usr/local/bin/alarm_received
+
+config internal 'hardware'
+       option i2c_bus  0
+
+config internal 'process'
+       option delay    48
+       option working_dir "/var/weather/"
+       option dump_file "/var/weather/weather.state"
+
+config device "bme280"
+       option module   "bmp280_i2c"
+       option address  "0x76"
+       option type     "i2c:iio"
+       option name "bme280"
+       list set_param  "in_humidityrelative_oversampling_ratio:4"
+       list set_param  "in_temp_oversampling_ratio:8"
+       list set_param  "in_pressure_oversampling_ratio:8"
+       list parameter  "in_temp_input:T:0.001:-4"      # source, name, scale, correction
+       list parameter  "in_pressure_input:P:10"
+       list parameter  "in_humidityrelative_input:H:0.001"
+
+config device "hmc5843"
+       option module   "hmc5843_i2c"
+       option address  "0x1e"
+       option type     "i2c:iio"
+       option name     "hmc5843"
+       list set_param  "in_magn_meas_conf:normal"
+       list set_param  "in_magn_sampling_frequency:2" 
+       list set_param  "in_magn_scale:0.000007692"
+       list parameter  "in_magn_x_raw:MX"
+       list parameter  "in_magn_y_raw:MY"
+       list parameter  "in_magn_z_raw:MZ"
+
+config device "ads1115"
+       option module   "ads1015"
+       option address  "0x48"
+       option type     "i2c:hwmon"
+       option name "ads1115"
+       list parameter  "in4_input:CO"
+       list parameter  "in5_input:CH4"
+       list parameter  "in6_input:AIR"