Добавлена обработка датчика содержания примесей в атмосфере (MQ-серия, аналоговый...

[weathermon.git] / Weather_WH2.ino

diff --git a/Weather_WH2.ino b/Weather_WH2.ino
index 0977862328dc7b510293b25733f15f07cec0f20a..a61dbfffe7deb498e614549d9cf8b6f33e6a8081 100644 (file)
--- a/Weather_WH2.ino
+++ b/Weather_WH2.ino
@@ -17,7 +17,7 @@ BMP085 bmp;
 
 // Humidity sensor at pin 4
 #define DHT11PIN 5
-
+int sensorPin = 0;
 #define DEBUG
 
 // LED pins
@@ -137,7 +137,18 @@ ISR(TIMER1_COMPA_vect)
 }
 
 void setup() {
-  
+
+  Serial1.begin(115200); // Set the baud.
+ 
+   // Wait for U-boot to finish startup.  Consume all bytes until we are done.
+  do {
+     while (Serial1.available() > 0) {
+        Serial1.read();
+     }
+   
+    delay(1000);
+  } while (Serial1.available()>0);  
+
   Serial1.begin(57600);
   Serial1.println();
   Serial1.println("STATUS:STARTING");
@@ -166,9 +177,12 @@ unsigned long outdoor_interval = 45000;
 unsigned long previousIndoor = 0;
 unsigned long previousOutdoor = 0;
 
+float temperature;
+float pressure;
 
 void loop() {
   unsigned long now;
+  int gas = 0;
   byte i;
 
   now = millis();
@@ -211,7 +225,7 @@ void loop() {
   if ((unsigned long)(now - previousMillis) >= indoor_interval) {
 
     previousMillis = now;
-  
+ 
     int chk = DHT.read11(DHT11PIN);
 
     if (chk==0) {
@@ -223,13 +237,6 @@ void loop() {
       Serial1.print(",TEMPERATURE=");
       Serial1.print(DHT.temperature);
 
-      Serial1.println();
-      Serial1.print("SENSOR:TYPE=BARO,");
-      Serial1.print("PRESSURE=");
-      Serial1.print(bmp.readPressure());
-      Serial1.print(",TEMPERATURE=");
-      Serial1.println(bmp.readTemperature());
-
       previousIndoor = now;
       digitalWrite(GREENPIN,HIGH);
 
@@ -243,6 +250,19 @@ void loop() {
         
     } 
 
+    pressure=bmp.readPressure();
+    temperature=bmp.readTemperature();
+    Serial1.println();
+    Serial1.print("SENSOR:TYPE=BARO,");
+    Serial1.print("PRESSURE=");
+    Serial1.print(pressure);
+    Serial1.print(",TEMPERATURE=");
+    Serial1.println(temperature);
+
+    gas = analogRead(sensorPin); // Получаем значения из датчика
+    Serial1.print("SENSOR:TYPE=GAS,VALUE=");
+    Serial1.println(gas); // Пишем в серийный порт
+
   }
   
   if ((unsigned long)(now - previousIndoor) > indoor_interval*10) {