+++ /dev/null
-#ifndef _R820T_TUNER_H
-#define _R820T_TUNER_H
-
-#define R820T_I2C_ADDR 0x34
-#define R820T_CHECK_ADDR 0x00
-#define R820T_CHECK_VAL 0x69
-
-#define R820T_IF_FREQ 3570000
-
-//***************************************************************
-//* INCLUDES.H
-//***************************************************************
-#define VERSION "R820T_v1.49_ASTRO"
-#define VER_NUM 49
-
-#define USE_16M_XTAL FALSE
-#define R828_Xtal 28800
-
-#define USE_DIPLEXER FALSE
-#define TUNER_CLK_OUT TRUE
-
-#ifndef _UINT_X_
-#define _UINT_X_ 1
-typedef unsigned char UINT8;
-typedef unsigned short UINT16;
-typedef unsigned int UINT32;
-#endif
-
-#define TRUE 1
-#define FALSE 0
-
-#define FUNCTION_SUCCESS 0
-#define FUNCTION_ERROR -1
-
-typedef enum _R828_ErrCode
-{
- RT_Success,
- RT_Fail
-}R828_ErrCode;
-
-typedef enum _Rafael_Chip_Type //Don't modify chip list
-{
- R828 = 0,
- R828D,
- R828S,
- R820T,
- R820C,
- R620D,
- R620S
-}Rafael_Chip_Type;
-//----------------------------------------------------------//
-// R828 Parameter //
-//----------------------------------------------------------//
-
-extern UINT8 R828_ADDRESS;
-
-#define DIP_FREQ 320000
-#define IMR_TRIAL 9
-#define VCO_pwr_ref 0x02
-
-extern UINT32 R828_IF_khz;
-extern UINT32 R828_CAL_LO_khz;
-extern UINT8 R828_IMR_point_num;
-extern UINT8 R828_IMR_done_flag;
-extern UINT8 Rafael_Chip;
-
-typedef enum _R828_Standard_Type //Don't remove standand list!!
-{
- NTSC_MN = 0,
- PAL_I,
- PAL_DK,
- PAL_B_7M, //no use
- PAL_BGH_8M, //for PAL B/G, PAL G/H
- SECAM_L,
- SECAM_L1_INV, //for SECAM L'
- SECAM_L1, //no use
- ATV_SIZE,
- DVB_T_6M = ATV_SIZE,
- DVB_T_7M,
- DVB_T_7M_2,
- DVB_T_8M,
- DVB_T2_6M,
- DVB_T2_7M,
- DVB_T2_7M_2,
- DVB_T2_8M,
- DVB_T2_1_7M,
- DVB_T2_10M,
- DVB_C_8M,
- DVB_C_6M,
- ISDB_T,
- DTMB,
- R828_ATSC,
- FM,
- STD_SIZE
-}R828_Standard_Type;
-
-extern UINT8 R828_Fil_Cal_flag[STD_SIZE];
-
-typedef enum _R828_SetFreq_Type
-{
- FAST_MODE = TRUE,
- NORMAL_MODE = FALSE
-}R828_SetFreq_Type;
-
-typedef enum _R828_LoopThrough_Type
-{
- LOOP_THROUGH = TRUE,
- SIGLE_IN = FALSE
-}R828_LoopThrough_Type;
-
-
-typedef enum _R828_InputMode_Type
-{
- AIR_IN = 0,
- CABLE_IN_1,
- CABLE_IN_2
-}R828_InputMode_Type;
-
-typedef enum _R828_IfAgc_Type
-{
- IF_AGC1 = 0,
- IF_AGC2
-}R828_IfAgc_Type;
-
-typedef enum _R828_GPIO_Type
-{
- HI_SIG = TRUE,
- LO_SIG = FALSE
-}R828_GPIO_Type;
-
-typedef struct _R828_Set_Info
-{
- UINT32 RF_Hz;
- UINT32 RF_KHz;
- R828_Standard_Type R828_Standard;
- R828_LoopThrough_Type RT_Input;
- R828_InputMode_Type RT_InputMode;
- R828_IfAgc_Type R828_IfAgc_Select;
-}R828_Set_Info;
-
-typedef struct _R828_RF_Gain_Info
-{
- UINT8 RF_gain1;
- UINT8 RF_gain2;
- UINT8 RF_gain_comb;
-}R828_RF_Gain_Info;
-
-typedef enum _R828_RF_Gain_TYPE
-{
- RF_AUTO = 0,
- RF_MANUAL
-}R828_RF_Gain_TYPE;
-
-typedef struct _R828_I2C_LEN_TYPE
-{
- UINT8 RegAddr;
- UINT8 Data[50];
- UINT8 Len;
-}R828_I2C_LEN_TYPE;
-
-typedef struct _R828_I2C_TYPE
-{
- UINT8 RegAddr;
- UINT8 Data;
-}R828_I2C_TYPE;
-//----------------------------------------------------------//
-// R828 Function //
-//----------------------------------------------------------//
-R828_ErrCode R828_Init(void *pTuner);
-R828_ErrCode R828_Standby(void *pTuner, R828_LoopThrough_Type R828_LoopSwitch);
-R828_ErrCode R828_GPIO(void *pTuner, R828_GPIO_Type R828_GPIO_Conrl);
-R828_ErrCode R828_SetStandard(void *pTuner, R828_Standard_Type RT_Standard);
-R828_ErrCode R828_SetFrequency(void *pTuner, R828_Set_Info R828_INFO, R828_SetFreq_Type R828_SetFreqMode);
-R828_ErrCode R828_GetRfGain(void *pTuner, R828_RF_Gain_Info *pR828_rf_gain);
-R828_ErrCode R828_SetRfGain(void *pTuner, int gain);
-R828_ErrCode R828_RfGainMode(void *pTuner, int manual);
-
-int
-r820t_SetRfFreqHz(
- void *pTuner,
- unsigned long RfFreqHz
- );
-
-int
-r820t_SetStandardMode(
- void *pTuner,
- int StandardMode
- );
-
-int
-r820t_SetStandby(
- void *pTuner,
- int LoopThroughType
- );
-
-#endif /* _R820T_TUNER_H */