-#include "rtl_433.h"
-
-// ** Acurite 5n1 functions **
-
-const float acurite_winddirections[] =
- { 337.5, 315.0, 292.5, 270.0, 247.5, 225.0, 202.5, 180,
- 157.5, 135.0, 112.5, 90.0, 67.5, 45.0, 22.5, 0.0 };
-
-static int acurite_raincounter = 0;
-
-static int acurite_crc(uint8_t row[BITBUF_COLS], int cols) {
- // sum of first n-1 bytes modulo 256 should equal nth byte
- int i;
- int sum = 0;
- for ( i=0; i < cols; i++)
- sum += row[i];
- if ( sum % 256 == row[cols] )
- return 1;
- else
- return 0;
-}
-
-static int acurite_detect(uint8_t *pRow) {
- int i;
- if ( pRow[0] != 0x00 ) {
- // invert bits due to wierd issue
- for (i = 0; i < 8; i++)
- pRow[i] = ~pRow[i] & 0xFF;
- pRow[0] |= pRow[8]; // fix first byte that has mashed leading bit
-
- if (acurite_crc(pRow, 7))
- return 1; // passes crc check
- }
- return 0;
-}
-
-static float acurite_getTemp (uint8_t highbyte, uint8_t lowbyte) {
- // range -40 to 158 F
- int highbits = (highbyte & 0x0F) << 7 ;
- int lowbits = lowbyte & 0x7F;
- int rawtemp = highbits | lowbits;
- float temp = (rawtemp - 400) / 10.0;
- return temp;
-}
-
-static int acurite_getWindSpeed (uint8_t highbyte, uint8_t lowbyte) {
- // range: 0 to 159 kph
- // TODO: sensor does not seem to be in kph, e.g.,
- // a value of 49 here was registered as 41 kph on base unit
- // value could be rpm, etc which may need (polynomial) scaling factor??
- int highbits = ( highbyte & 0x1F) << 3;
- int lowbits = ( lowbyte & 0x70 ) >> 4;
- int speed = highbits | lowbits;
- return speed;
-}
-
-static float acurite_getWindDirection (uint8_t byte) {
- // 16 compass points, ccw from (NNW) to 15 (N)
- int direction = byte & 0x0F;
- return acurite_winddirections[direction];
-}
-
-static int acurite_getHumidity (uint8_t byte) {
- // range: 1 to 99 %RH
- int humidity = byte & 0x7F;
- return humidity;
-}
-
-static int acurite_getRainfallCounter (uint8_t hibyte, uint8_t lobyte) {
- // range: 0 to 99.99 in, 0.01 in incr., rolling counter?
- int raincounter = ((hibyte & 0x7f) << 7) | (lobyte & 0x7F);
- return raincounter;
-}
-
-static int acurite5n1_callback(uint8_t bb[BITBUF_ROWS][BITBUF_COLS],int16_t bits_per_row[BITBUF_ROWS]) {
- // acurite 5n1 weather sensor decoding for rtl_433
- // Jens Jensen 2014
- int i;
- uint8_t *buf = NULL;
- // run through rows til we find one with good crc (brute force)
- for (i=0; i < BITBUF_ROWS; i++) {
- if (acurite_detect(bb[i])) {
- buf = bb[i];
- break; // done
- }
- }
-
- if (buf) {
- // decode packet here
- fprintf(stdout, "SENSOR:TYPE=ACURITE_5IN1,");
- if (debug_output) {
- for (i=0; i < 8; i++)
- fprintf(stderr, "%02X ", buf[i]);
- fprintf(stderr, "CRC OK\n");
- }
-
- if ((buf[2] & 0x0F) == 1) {
- // wind speed, wind direction, rainfall
-
- float rainfall = 0.00;
- int raincounter = acurite_getRainfallCounter(buf[5], buf[6]);
- if (acurite_raincounter > 0) {
- // track rainfall difference after first run
- rainfall = ( raincounter - acurite_raincounter ) * 0.01;
- } else {
- // capture starting counter
- acurite_raincounter = raincounter;
- }
-
- fprintf(stdout, "WINDSPEED=%d,",
- acurite_getWindSpeed(buf[3], buf[4]));
- fprintf(stdout, "WINDDIRECTION=%0.1f,",
- acurite_getWindDirection(buf[4]));
- fprintf(stdout, "RAINGAUGE=%0.2f\n", rainfall);
-
- } else if ((buf[2] & 0x0F) == 8) {
- // wind speed, temp, RH
- fprintf(stdout, "WINDSPEED=%d,",
- acurite_getWindSpeed(buf[3], buf[4]));
- fprintf(stdout, "TEMP=%2.1f,",
- acurite_getTemp(buf[4], buf[5]));
- fprintf(stdout, "HUMIDITY=%d\n",
- acurite_getHumidity(buf[6]));
- }
- } else {
- return 0;
- }
-
- if (debug_output)
- debug_callback(bb, bits_per_row);
-
- return 1;
-}
-
-static int acurite_rain_gauge_callback(uint8_t bb[BITBUF_ROWS][BITBUF_COLS], int16_t bits_per_row[BITBUF_ROWS]) {
- // This needs more validation to positively identify correct sensor type, but it basically works if message is really from acurite raingauge and it doesn't have any errors
- if ((bb[0][0] != 0) && (bb[0][1] != 0) && (bb[0][2]!=0) && (bb[0][3] == 0) && (bb[0][4] == 0)) {
- float total_rain = ((bb[0][1]&0xf)<<8)+ bb[0][2];
- total_rain /= 2; // Sensor reports number of bucket tips. Each bucket tip is .5mm
- fprintf(stdout, "SENSOR:TYPE=ACURITE_RAIN_GAUGE,RAIN=%2.1f\n", total_rain);
- fprintf(stderr, "Raw Message: %02x %02x %02x %02x %02x\n",bb[0][0],bb[0][1],bb[0][2],bb[0][3],bb[0][4]);
- return 1;
- }
- return 0;
-}
-
-static int acurite_th_detect(uint8_t *buf){
- if(buf[5] != 0) return 0;
- uint8_t sum = (buf[0] + buf[1] + buf[2] + buf[3]) & 0xff;
- if(sum == 0) return 0;
- return sum == buf[4];
-}
-static float acurite_th_temperature(uint8_t *s){
- uint16_t shifted = (((s[1] & 0x0f) << 8) | s[2]) << 4; // Logical left shift
- return (((int16_t)shifted) >> 4) / 10.0; // Arithmetic right shift
-}
-static int acurite_th_callback(uint8_t bb[BITBUF_ROWS][BITBUF_COLS], int16_t bits_per_row[BITBUF_ROWS]) {
- uint8_t *buf = NULL;
- int i;
- for(i = 0; i < BITBUF_ROWS; i++){
- if(acurite_th_detect(bb[i])){
- buf = bb[i];
- break;
- }
- }
- if(buf){
- fprintf(stdout, "SENSOR:TYPE=ACURITE_TEMP,");
- fprintf(stdout, "TEMP=%.1f,", acurite_th_temperature(buf));
- fprintf(stderr, "HUMIDITY=%d\n", buf[3]);
- return 1;
- }
-
- return 0;
-}
-
-r_device acurite5n1 = {
- /* .id = */ 10,
- /* .name = */ "Acurite 5n1 Weather Station",
- /* .modulation = */ OOK_PWM_P,
- /* .short_limit = */ 70,
- /* .long_limit = */ 240,
- /* .reset_limit = */ 21000,
- /* .json_callback = */ &acurite5n1_callback,
-};
-
-r_device acurite_rain_gauge = {
- /* .id = */ 11,
- /* .name = */ "Acurite 896 Rain Gauge",
- /* .modulation = */ OOK_PWM_D,
- /* .short_limit = */ 1744/4,
- /* .long_limit = */ 3500/4,
- /* .reset_limit = */ 5000/4,
- /* .json_callback = */ &acurite_rain_gauge_callback,
-};
-
-r_device acurite_th = {
- /* .id = */ 12,
- /* .name = */ "Acurite Temperature and Humidity Sensor",
- /* .modulation = */ OOK_PWM_D,
- /* .short_limit = */ 300,
- /* .long_limit = */ 550,
- /* .reset_limit = */ 2500,
- /* .json_callback = */ &acurite_th_callback,
-};
projects / rtl-433.git / blobdiff