From: Roman Bazalevsky Date: Sat, 24 Jan 2015 13:04:37 +0000 (+0300) Subject: Obsolete files removed X-Git-Url: https://git.rvb.name/rtl-433.git/commitdiff_plain/c8df1ec0454217770b6fc24e676bc4cb8f6055ca Obsolete files removed --- diff --git a/README b/README deleted file mode 100644 index acc298b..0000000 --- a/README +++ /dev/null @@ -1,31 +0,0 @@ -rtl_433, turns your Realtek RTL2832 based DVB dongle into a 433.92MHz generic data receiver -====================================================================== - -Installation instructions: - -cd rtl_433/ -mkdir build -cd build -cmake ../ -make - - -Running: - -./rtl_433 -h - -Usage: [-d device_index (default: 0)] - [-g gain (default: 0 for auto)] - [-a analyze mode, print a textual description of the signal] - [-l change the detection level used to determine pulses (0-32000) default 10000] - [-f change the receive frequency, default is 433.92MHz] - [-S force sync output (default: async)] - [-r read data from file instead of from a receiver] - filename (a '-' dumps samples to stdout) - - -./rtl_433 -a will run in analyze mode and you will get a text log of the received signal. -./rtl_433 -a file_name will save the demodulated signal in a file. The format of the file is 48kHz 16 bit samples. -./rtl_433 will run the software in receive mode. Some sensor data can be receviced. - -This software is mostly useable for developers right now. diff --git a/include/reg_field.h b/include/reg_field.h deleted file mode 100644 index 18a6922..0000000 --- a/include/reg_field.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _REG_FIELD_H -#define _REG_FIELD_H - -#include -#include - -enum cmd_op { - CMD_OP_GET = (1 << 0), - CMD_OP_SET = (1 << 1), - CMD_OP_EXEC = (1 << 2), -}; - -enum pstate { - ST_IN_CMD, - ST_IN_ARG, -}; - -struct strbuf { - uint8_t idx; - char buf[32]; -}; - -struct cmd_state { - struct strbuf cmd; - struct strbuf arg; - enum pstate state; - void (*out)(const char *format, va_list ap); -}; - -struct cmd { - const char *cmd; - uint32_t ops; - int (*cb)(struct cmd_state *cs, enum cmd_op op, const char *cmd, - int argc, char **argv); - const char *help; -}; - -/* structure describing a field in a register */ -struct reg_field { - uint8_t reg; - uint8_t shift; - uint8_t width; -}; - -struct reg_field_ops { - const struct reg_field *fields; - const char **field_names; - uint32_t num_fields; - void *data; - int (*write_cb)(void *data, uint32_t reg, uint32_t val); - uint32_t (*read_cb)(void *data, uint32_t reg); -}; - -uint32_t reg_field_read(struct reg_field_ops *ops, struct reg_field *field); -int reg_field_write(struct reg_field_ops *ops, struct reg_field *field, uint32_t val); -int reg_field_cmd(struct cmd_state *cs, enum cmd_op op, - const char *cmd, int argc, char **argv, - struct reg_field_ops *ops); - -#endif diff --git a/include/rtl-sdr.h b/include/rtl-sdr.h deleted file mode 100644 index 75bfd3f..0000000 --- a/include/rtl-sdr.h +++ /dev/null @@ -1,366 +0,0 @@ -/* - * rtl-sdr, turns your Realtek RTL2832 based DVB dongle into a SDR receiver - * Copyright (C) 2012 by Steve Markgraf - * Copyright (C) 2012 by Dimitri Stolnikov - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef __RTL_SDR_H -#define __RTL_SDR_H - -#ifdef __cplusplus -extern "C" { -#endif - -#include -#include - -typedef struct rtlsdr_dev rtlsdr_dev_t; - -RTLSDR_API uint32_t rtlsdr_get_device_count(void); - -RTLSDR_API const char* rtlsdr_get_device_name(uint32_t index); - -/*! - * Get USB device strings. - * - * NOTE: The string arguments must provide space for up to 256 bytes. - * - * \param index the device index - * \param manufact manufacturer name, may be NULL - * \param product product name, may be NULL - * \param serial serial number, may be NULL - * \return 0 on success - */ -RTLSDR_API int rtlsdr_get_device_usb_strings(uint32_t index, - char *manufact, - char *product, - char *serial); - -/*! - * Get device index by USB serial string descriptor. - * - * \param serial serial string of the device - * \return device index of first device where the name matched - * \return -1 if name is NULL - * \return -2 if no devices were found at all - * \return -3 if devices were found, but none with matching name - */ -RTLSDR_API int rtlsdr_get_index_by_serial(const char *serial); - -RTLSDR_API int rtlsdr_open(rtlsdr_dev_t **dev, uint32_t index); - -RTLSDR_API int rtlsdr_close(rtlsdr_dev_t *dev); - -/* configuration functions */ - -/*! - * Set crystal oscillator frequencies used for the RTL2832 and the tuner IC. - * - * Usually both ICs use the same clock. Changing the clock may make sense if - * you are applying an external clock to the tuner or to compensate the - * frequency (and samplerate) error caused by the original (cheap) crystal. - * - * NOTE: Call this function only if you fully understand the implications. - * - * \param dev the device handle given by rtlsdr_open() - * \param rtl_freq frequency value used to clock the RTL2832 in Hz - * \param tuner_freq frequency value used to clock the tuner IC in Hz - * \return 0 on success - */ -RTLSDR_API int rtlsdr_set_xtal_freq(rtlsdr_dev_t *dev, uint32_t rtl_freq, - uint32_t tuner_freq); - -/*! - * Get crystal oscillator frequencies used for the RTL2832 and the tuner IC. - * - * Usually both ICs use the same clock. - * - * \param dev the device handle given by rtlsdr_open() - * \param rtl_freq frequency value used to clock the RTL2832 in Hz - * \param tuner_freq frequency value used to clock the tuner IC in Hz - * \return 0 on success - */ -RTLSDR_API int rtlsdr_get_xtal_freq(rtlsdr_dev_t *dev, uint32_t *rtl_freq, - uint32_t *tuner_freq); - -/*! - * Get USB device strings. - * - * NOTE: The string arguments must provide space for up to 256 bytes. - * - * \param dev the device handle given by rtlsdr_open() - * \param manufact manufacturer name, may be NULL - * \param product product name, may be NULL - * \param serial serial number, may be NULL - * \return 0 on success - */ -RTLSDR_API int rtlsdr_get_usb_strings(rtlsdr_dev_t *dev, char *manufact, - char *product, char *serial); - -/*! - * Write the device EEPROM - * - * \param dev the device handle given by rtlsdr_open() - * \param data buffer of data to be written - * \param offset address where the data should be written - * \param len length of the data - * \return 0 on success - * \return -1 if device handle is invalid - * \return -2 if EEPROM size is exceeded - * \return -3 if no EEPROM was found - */ - -RTLSDR_API int rtlsdr_write_eeprom(rtlsdr_dev_t *dev, uint8_t *data, - uint8_t offset, uint16_t len); - -/*! - * Read the device EEPROM - * - * \param dev the device handle given by rtlsdr_open() - * \param data buffer where the data should be written - * \param offset address where the data should be read from - * \param len length of the data - * \return 0 on success - * \return -1 if device handle is invalid - * \return -2 if EEPROM size is exceeded - * \return -3 if no EEPROM was found - */ - -RTLSDR_API int rtlsdr_read_eeprom(rtlsdr_dev_t *dev, uint8_t *data, - uint8_t offset, uint16_t len); - -RTLSDR_API int rtlsdr_set_center_freq(rtlsdr_dev_t *dev, uint32_t freq); - -/*! - * Get actual frequency the device is tuned to. - * - * \param dev the device handle given by rtlsdr_open() - * \return 0 on error, frequency in Hz otherwise - */ -RTLSDR_API uint32_t rtlsdr_get_center_freq(rtlsdr_dev_t *dev); - -/*! - * Set the frequency correction value for the device. - * - * \param dev the device handle given by rtlsdr_open() - * \param ppm correction value in parts per million (ppm) - * \return 0 on success - */ -RTLSDR_API int rtlsdr_set_freq_correction(rtlsdr_dev_t *dev, int ppm); - -/*! - * Get actual frequency correction value of the device. - * - * \param dev the device handle given by rtlsdr_open() - * \return correction value in parts per million (ppm) - */ -RTLSDR_API int rtlsdr_get_freq_correction(rtlsdr_dev_t *dev); - -enum rtlsdr_tuner { - RTLSDR_TUNER_UNKNOWN = 0, - RTLSDR_TUNER_E4000, - RTLSDR_TUNER_FC0012, - RTLSDR_TUNER_FC0013, - RTLSDR_TUNER_FC2580, - RTLSDR_TUNER_R820T -}; - -/*! - * Get the tuner type. - * - * \param dev the device handle given by rtlsdr_open() - * \return RTLSDR_TUNER_UNKNOWN on error, tuner type otherwise - */ -RTLSDR_API enum rtlsdr_tuner rtlsdr_get_tuner_type(rtlsdr_dev_t *dev); - -/*! - * Get a list of gains supported by the tuner. - * - * NOTE: The gains argument must be preallocated by the caller. If NULL is - * being given instead, the number of available gain values will be returned. - * - * \param dev the device handle given by rtlsdr_open() - * \param gains array of gain values. In tenths of a dB, 115 means 11.5 dB. - * \return <= 0 on error, number of available (returned) gain values otherwise - */ -RTLSDR_API int rtlsdr_get_tuner_gains(rtlsdr_dev_t *dev, int *gains); - -/*! - * Set the gain for the device. - * Manual gain mode must be enabled for this to work. - * - * Valid gain values (in tenths of a dB) for the E4000 tuner: - * -10, 15, 40, 65, 90, 115, 140, 165, 190, - * 215, 240, 290, 340, 420, 430, 450, 470, 490 - * - * Valid gain values may be queried with \ref rtlsdr_get_tuner_gains function. - * - * \param dev the device handle given by rtlsdr_open() - * \param gain in tenths of a dB, 115 means 11.5 dB. - * \return 0 on success - */ -RTLSDR_API int rtlsdr_set_tuner_gain(rtlsdr_dev_t *dev, int gain); - -/*! - * Get actual gain the device is configured to. - * - * \param dev the device handle given by rtlsdr_open() - * \return 0 on error, gain in tenths of a dB, 115 means 11.5 dB. - */ -RTLSDR_API int rtlsdr_get_tuner_gain(rtlsdr_dev_t *dev); - -/*! - * Set the intermediate frequency gain for the device. - * - * \param dev the device handle given by rtlsdr_open() - * \param stage intermediate frequency gain stage number (1 to 6 for E4000) - * \param gain in tenths of a dB, -30 means -3.0 dB. - * \return 0 on success - */ -RTLSDR_API int rtlsdr_set_tuner_if_gain(rtlsdr_dev_t *dev, int stage, int gain); - -/*! - * Set the gain mode (automatic/manual) for the device. - * Manual gain mode must be enabled for the gain setter function to work. - * - * \param dev the device handle given by rtlsdr_open() - * \param manual gain mode, 1 means manual gain mode shall be enabled. - * \return 0 on success - */ -RTLSDR_API int rtlsdr_set_tuner_gain_mode(rtlsdr_dev_t *dev, int manual); - -/* this will select the baseband filters according to the requested sample rate */ -RTLSDR_API int rtlsdr_set_sample_rate(rtlsdr_dev_t *dev, uint32_t rate); - -/*! - * Get actual sample rate the device is configured to. - * - * \param dev the device handle given by rtlsdr_open() - * \return 0 on error, sample rate in Hz otherwise - */ -RTLSDR_API uint32_t rtlsdr_get_sample_rate(rtlsdr_dev_t *dev); - -/*! - * Enable test mode that returns an 8 bit counter instead of the samples. - * The counter is generated inside the RTL2832. - * - * \param dev the device handle given by rtlsdr_open() - * \param test mode, 1 means enabled, 0 disabled - * \return 0 on success - */ -RTLSDR_API int rtlsdr_set_testmode(rtlsdr_dev_t *dev, int on); - -/*! - * Enable or disable the internal digital AGC of the RTL2832. - * - * \param dev the device handle given by rtlsdr_open() - * \param digital AGC mode, 1 means enabled, 0 disabled - * \return 0 on success - */ -RTLSDR_API int rtlsdr_set_agc_mode(rtlsdr_dev_t *dev, int on); - -/*! - * Enable or disable the direct sampling mode. When enabled, the IF mode - * of the RTL2832 is activated, and rtlsdr_set_center_freq() will control - * the IF-frequency of the DDC, which can be used to tune from 0 to 28.8 MHz - * (xtal frequency of the RTL2832). - * - * \param dev the device handle given by rtlsdr_open() - * \param on 0 means disabled, 1 I-ADC input enabled, 2 Q-ADC input enabled - * \return 0 on success - */ -RTLSDR_API int rtlsdr_set_direct_sampling(rtlsdr_dev_t *dev, int on); - -/*! - * Get state of the direct sampling mode - * - * \param dev the device handle given by rtlsdr_open() - * \return -1 on error, 0 means disabled, 1 I-ADC input enabled - * 2 Q-ADC input enabled - */ -RTLSDR_API int rtlsdr_get_direct_sampling(rtlsdr_dev_t *dev); - -/*! - * Enable or disable offset tuning for zero-IF tuners, which allows to avoid - * problems caused by the DC offset of the ADCs and 1/f noise. - * - * \param dev the device handle given by rtlsdr_open() - * \param on 0 means disabled, 1 enabled - * \return 0 on success - */ -RTLSDR_API int rtlsdr_set_offset_tuning(rtlsdr_dev_t *dev, int on); - -/*! - * Get state of the offset tuning mode - * - * \param dev the device handle given by rtlsdr_open() - * \return -1 on error, 0 means disabled, 1 enabled - */ -RTLSDR_API int rtlsdr_get_offset_tuning(rtlsdr_dev_t *dev); - -/* streaming functions */ - -RTLSDR_API int rtlsdr_reset_buffer(rtlsdr_dev_t *dev); - -RTLSDR_API int rtlsdr_read_sync(rtlsdr_dev_t *dev, void *buf, int len, int *n_read); - -typedef void(*rtlsdr_read_async_cb_t)(unsigned char *buf, uint32_t len, void *ctx); - -/*! - * Read samples from the device asynchronously. This function will block until - * it is being canceled using rtlsdr_cancel_async() - * - * NOTE: This function is deprecated and is subject for removal. - * - * \param dev the device handle given by rtlsdr_open() - * \param cb callback function to return received samples - * \param ctx user specific context to pass via the callback function - * \return 0 on success - */ -RTLSDR_API int rtlsdr_wait_async(rtlsdr_dev_t *dev, rtlsdr_read_async_cb_t cb, void *ctx); - -/*! - * Read samples from the device asynchronously. This function will block until - * it is being canceled using rtlsdr_cancel_async() - * - * \param dev the device handle given by rtlsdr_open() - * \param cb callback function to return received samples - * \param ctx user specific context to pass via the callback function - * \param buf_num optional buffer count, buf_num * buf_len = overall buffer size - * set to 0 for default buffer count (32) - * \param buf_len optional buffer length, must be multiple of 512, - * set to 0 for default buffer length (16 * 32 * 512) - * \return 0 on success - */ -RTLSDR_API int rtlsdr_read_async(rtlsdr_dev_t *dev, - rtlsdr_read_async_cb_t cb, - void *ctx, - uint32_t buf_num, - uint32_t buf_len); - -/*! - * Cancel all pending asynchronous operations on the device. - * - * \param dev the device handle given by rtlsdr_open() - * \return 0 on success - */ -RTLSDR_API int rtlsdr_cancel_async(rtlsdr_dev_t *dev); - -#ifdef __cplusplus -} -#endif - -#endif /* __RTL_SDR_H */ diff --git a/include/rtl-sdr_export.h b/include/rtl-sdr_export.h deleted file mode 100644 index 69e178d..0000000 --- a/include/rtl-sdr_export.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * rtl-sdr, turns your Realtek RTL2832 based DVB dongle into a SDR receiver - * Copyright (C) 2012 by Hoernchen - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef RTLSDR_EXPORT_H -#define RTLSDR_EXPORT_H - -#if defined __GNUC__ -# if __GNUC__ >= 4 -# define __SDR_EXPORT __attribute__((visibility("default"))) -# define __SDR_IMPORT __attribute__((visibility("default"))) -# else -# define __SDR_EXPORT -# define __SDR_IMPORT -# endif -#elif _MSC_VER -# define __SDR_EXPORT __declspec(dllexport) -# define __SDR_IMPORT __declspec(dllimport) -#else -# define __SDR_EXPORT -# define __SDR_IMPORT -#endif - -#ifndef rtlsdr_STATIC -# ifdef rtlsdr_EXPORTS -# define RTLSDR_API __SDR_EXPORT -# else -# define RTLSDR_API __SDR_IMPORT -# endif -#else -#define RTLSDR_API -#endif -#endif /* RTLSDR_EXPORT_H */ diff --git a/include/rtlsdr_i2c.h b/include/rtlsdr_i2c.h deleted file mode 100644 index 7676689..0000000 --- a/include/rtlsdr_i2c.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __I2C_H -#define __I2C_H - -uint32_t rtlsdr_get_tuner_clock(void *dev); -int rtlsdr_i2c_write_fn(void *dev, uint8_t addr, uint8_t *buf, int len); -int rtlsdr_i2c_read_fn(void *dev, uint8_t addr, uint8_t *buf, int len); - -#endif diff --git a/include/tuner_e4k.h b/include/tuner_e4k.h deleted file mode 100644 index 6db6b2a..0000000 --- a/include/tuner_e4k.h +++ /dev/null @@ -1,224 +0,0 @@ -#ifndef _E4K_TUNER_H -#define _E4K_TUNER_H - -/* - * Elonics E4000 tuner driver - * - * (C) 2011-2012 by Harald Welte - * (C) 2012 by Sylvain Munaut - * (C) 2012 by Hoernchen - * - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#define E4K_I2C_ADDR 0xc8 -#define E4K_CHECK_ADDR 0x02 -#define E4K_CHECK_VAL 0x40 - -enum e4k_reg { - E4K_REG_MASTER1 = 0x00, - E4K_REG_MASTER2 = 0x01, - E4K_REG_MASTER3 = 0x02, - E4K_REG_MASTER4 = 0x03, - E4K_REG_MASTER5 = 0x04, - E4K_REG_CLK_INP = 0x05, - E4K_REG_REF_CLK = 0x06, - E4K_REG_SYNTH1 = 0x07, - E4K_REG_SYNTH2 = 0x08, - E4K_REG_SYNTH3 = 0x09, - E4K_REG_SYNTH4 = 0x0a, - E4K_REG_SYNTH5 = 0x0b, - E4K_REG_SYNTH6 = 0x0c, - E4K_REG_SYNTH7 = 0x0d, - E4K_REG_SYNTH8 = 0x0e, - E4K_REG_SYNTH9 = 0x0f, - E4K_REG_FILT1 = 0x10, - E4K_REG_FILT2 = 0x11, - E4K_REG_FILT3 = 0x12, - // gap - E4K_REG_GAIN1 = 0x14, - E4K_REG_GAIN2 = 0x15, - E4K_REG_GAIN3 = 0x16, - E4K_REG_GAIN4 = 0x17, - // gap - E4K_REG_AGC1 = 0x1a, - E4K_REG_AGC2 = 0x1b, - E4K_REG_AGC3 = 0x1c, - E4K_REG_AGC4 = 0x1d, - E4K_REG_AGC5 = 0x1e, - E4K_REG_AGC6 = 0x1f, - E4K_REG_AGC7 = 0x20, - E4K_REG_AGC8 = 0x21, - // gap - E4K_REG_AGC11 = 0x24, - E4K_REG_AGC12 = 0x25, - // gap - E4K_REG_DC1 = 0x29, - E4K_REG_DC2 = 0x2a, - E4K_REG_DC3 = 0x2b, - E4K_REG_DC4 = 0x2c, - E4K_REG_DC5 = 0x2d, - E4K_REG_DC6 = 0x2e, - E4K_REG_DC7 = 0x2f, - E4K_REG_DC8 = 0x30, - // gap - E4K_REG_QLUT0 = 0x50, - E4K_REG_QLUT1 = 0x51, - E4K_REG_QLUT2 = 0x52, - E4K_REG_QLUT3 = 0x53, - // gap - E4K_REG_ILUT0 = 0x60, - E4K_REG_ILUT1 = 0x61, - E4K_REG_ILUT2 = 0x62, - E4K_REG_ILUT3 = 0x63, - // gap - E4K_REG_DCTIME1 = 0x70, - E4K_REG_DCTIME2 = 0x71, - E4K_REG_DCTIME3 = 0x72, - E4K_REG_DCTIME4 = 0x73, - E4K_REG_PWM1 = 0x74, - E4K_REG_PWM2 = 0x75, - E4K_REG_PWM3 = 0x76, - E4K_REG_PWM4 = 0x77, - E4K_REG_BIAS = 0x78, - E4K_REG_CLKOUT_PWDN = 0x7a, - E4K_REG_CHFILT_CALIB = 0x7b, - E4K_REG_I2C_REG_ADDR = 0x7d, - // FIXME -}; - -#define E4K_MASTER1_RESET (1 << 0) -#define E4K_MASTER1_NORM_STBY (1 << 1) -#define E4K_MASTER1_POR_DET (1 << 2) - -#define E4K_SYNTH1_PLL_LOCK (1 << 0) -#define E4K_SYNTH1_BAND_SHIF 1 - -#define E4K_SYNTH7_3PHASE_EN (1 << 3) - -#define E4K_SYNTH8_VCOCAL_UPD (1 << 2) - -#define E4K_FILT3_DISABLE (1 << 5) - -#define E4K_AGC1_LIN_MODE (1 << 4) -#define E4K_AGC1_LNA_UPDATE (1 << 5) -#define E4K_AGC1_LNA_G_LOW (1 << 6) -#define E4K_AGC1_LNA_G_HIGH (1 << 7) - -#define E4K_AGC6_LNA_CAL_REQ (1 << 4) - -#define E4K_AGC7_MIX_GAIN_AUTO (1 << 0) -#define E4K_AGC7_GAIN_STEP_5dB (1 << 5) - -#define E4K_AGC8_SENS_LIN_AUTO (1 << 0) - -#define E4K_AGC11_LNA_GAIN_ENH (1 << 0) - -#define E4K_DC1_CAL_REQ (1 << 0) - -#define E4K_DC5_I_LUT_EN (1 << 0) -#define E4K_DC5_Q_LUT_EN (1 << 1) -#define E4K_DC5_RANGE_DET_EN (1 << 2) -#define E4K_DC5_RANGE_EN (1 << 3) -#define E4K_DC5_TIMEVAR_EN (1 << 4) - -#define E4K_CLKOUT_DISABLE 0x96 - -#define E4K_CHFCALIB_CMD (1 << 0) - -#define E4K_AGC1_MOD_MASK 0xF - -enum e4k_agc_mode { - E4K_AGC_MOD_SERIAL = 0x0, - E4K_AGC_MOD_IF_PWM_LNA_SERIAL = 0x1, - E4K_AGC_MOD_IF_PWM_LNA_AUTONL = 0x2, - E4K_AGC_MOD_IF_PWM_LNA_SUPERV = 0x3, - E4K_AGC_MOD_IF_SERIAL_LNA_PWM = 0x4, - E4K_AGC_MOD_IF_PWM_LNA_PWM = 0x5, - E4K_AGC_MOD_IF_DIG_LNA_SERIAL = 0x6, - E4K_AGC_MOD_IF_DIG_LNA_AUTON = 0x7, - E4K_AGC_MOD_IF_DIG_LNA_SUPERV = 0x8, - E4K_AGC_MOD_IF_SERIAL_LNA_AUTON = 0x9, - E4K_AGC_MOD_IF_SERIAL_LNA_SUPERV = 0xa, -}; - -enum e4k_band { - E4K_BAND_VHF2 = 0, - E4K_BAND_VHF3 = 1, - E4K_BAND_UHF = 2, - E4K_BAND_L = 3, -}; - -enum e4k_mixer_filter_bw { - E4K_F_MIX_BW_27M = 0, - E4K_F_MIX_BW_4M6 = 8, - E4K_F_MIX_BW_4M2 = 9, - E4K_F_MIX_BW_3M8 = 10, - E4K_F_MIX_BW_3M4 = 11, - E4K_F_MIX_BW_3M = 12, - E4K_F_MIX_BW_2M7 = 13, - E4K_F_MIX_BW_2M3 = 14, - E4K_F_MIX_BW_1M9 = 15, -}; - -enum e4k_if_filter { - E4K_IF_FILTER_MIX, - E4K_IF_FILTER_CHAN, - E4K_IF_FILTER_RC -}; -struct e4k_pll_params { - uint32_t fosc; - uint32_t intended_flo; - uint32_t flo; - uint16_t x; - uint8_t z; - uint8_t r; - uint8_t r_idx; - uint8_t threephase; -}; - -struct e4k_state { - void *i2c_dev; - uint8_t i2c_addr; - enum e4k_band band; - struct e4k_pll_params vco; - void *rtl_dev; -}; - -int e4k_init(struct e4k_state *e4k); -int e4k_if_gain_set(struct e4k_state *e4k, uint8_t stage, int8_t value); -int e4k_mixer_gain_set(struct e4k_state *e4k, int8_t value); -int e4k_commonmode_set(struct e4k_state *e4k, int8_t value); -int e4k_tune_freq(struct e4k_state *e4k, uint32_t freq); -int e4k_tune_params(struct e4k_state *e4k, struct e4k_pll_params *p); -uint32_t e4k_compute_pll_params(struct e4k_pll_params *oscp, uint32_t fosc, uint32_t intended_flo); -int e4k_if_filter_bw_get(struct e4k_state *e4k, enum e4k_if_filter filter); -int e4k_if_filter_bw_set(struct e4k_state *e4k, enum e4k_if_filter filter, - uint32_t bandwidth); -int e4k_if_filter_chan_enable(struct e4k_state *e4k, int on); -int e4k_rf_filter_set(struct e4k_state *e4k); - -int e4k_reg_write(struct e4k_state *e4k, uint8_t reg, uint8_t val); -uint8_t e4k_reg_read(struct e4k_state *e4k, uint8_t reg); - -int e4k_manual_dc_offset(struct e4k_state *e4k, int8_t iofs, int8_t irange, int8_t qofs, int8_t qrange); -int e4k_dc_offset_calibrate(struct e4k_state *e4k); -int e4k_dc_offset_gen_table(struct e4k_state *e4k); - -int e4k_set_lna_gain(struct e4k_state *e4k, int32_t gain); -int e4k_enable_manual_gain(struct e4k_state *e4k, uint8_t manual); -int e4k_set_enh_gain(struct e4k_state *e4k, int32_t gain); -#endif /* _E4K_TUNER_H */ diff --git a/include/tuner_fc0012.h b/include/tuner_fc0012.h deleted file mode 100644 index 9dd5356..0000000 --- a/include/tuner_fc0012.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Fitipower FC0012 tuner driver - * - * Copyright (C) 2012 Hans-Frieder Vogt - * - * modified for use in librtlsdr - * Copyright (C) 2012 Steve Markgraf - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef _FC0012_H_ -#define _FC0012_H_ - -#define FC0012_I2C_ADDR 0xc6 -#define FC0012_CHECK_ADDR 0x00 -#define FC0012_CHECK_VAL 0xa1 - -int fc0012_init(void *dev); -int fc0012_set_params(void *dev, uint32_t freq, uint32_t bandwidth); -int fc0012_set_gain(void *dev, int gain); - -#endif diff --git a/include/tuner_fc0013.h b/include/tuner_fc0013.h deleted file mode 100644 index 68a26ee..0000000 --- a/include/tuner_fc0013.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Fitipower FC0013 tuner driver - * - * Copyright (C) 2012 Hans-Frieder Vogt - * - * modified for use in librtlsdr - * Copyright (C) 2012 Steve Markgraf - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef _FC0013_H_ -#define _FC0013_H_ - -#define FC0013_I2C_ADDR 0xc6 -#define FC0013_CHECK_ADDR 0x00 -#define FC0013_CHECK_VAL 0xa3 - -int fc0013_init(void *dev); -int fc0013_set_params(void *dev, uint32_t freq, uint32_t bandwidth); -int fc0013_set_gain_mode(void *dev, int manual); -int fc0013_set_lna_gain(void *dev, int gain); - -#endif diff --git a/include/tuner_fc2580.h b/include/tuner_fc2580.h deleted file mode 100644 index 9ebd935..0000000 --- a/include/tuner_fc2580.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef __TUNER_FC2580_H -#define __TUNER_FC2580_H - -#define BORDER_FREQ 2600000 //2.6GHz : The border frequency which determines whether Low VCO or High VCO is used -#define USE_EXT_CLK 0 //0 : Use internal XTAL Oscillator / 1 : Use External Clock input -#define OFS_RSSI 57 - -#define FC2580_I2C_ADDR 0xac -#define FC2580_CHECK_ADDR 0x01 -#define FC2580_CHECK_VAL 0x56 - -typedef enum { - FC2580_UHF_BAND, - FC2580_L_BAND, - FC2580_VHF_BAND, - FC2580_NO_BAND -} fc2580_band_type; - -typedef enum { - FC2580_FCI_FAIL, - FC2580_FCI_SUCCESS -} fc2580_fci_result_type; - -enum FUNCTION_STATUS -{ - FUNCTION_SUCCESS, - FUNCTION_ERROR, -}; - -extern void fc2580_wait_msec(void *pTuner, int a); - -fc2580_fci_result_type fc2580_i2c_write(void *pTuner, unsigned char reg, unsigned char val); -fc2580_fci_result_type fc2580_i2c_read(void *pTuner, unsigned char reg, unsigned char *read_data); - -/*============================================================================== - fc2580 initial setting - - This function is a generic function which gets called to initialize - - fc2580 in DVB-H mode or L-Band TDMB mode - - - - ifagc_mode - type : integer - 1 : Internal AGC - 2 : Voltage Control Mode - -==============================================================================*/ -fc2580_fci_result_type fc2580_set_init(void *pTuner, int ifagc_mode, unsigned int freq_xtal ); - -/*============================================================================== - fc2580 frequency setting - - This function is a generic function which gets called to change LO Frequency - - of fc2580 in DVB-H mode or L-Band TDMB mode - - - - f_lo - Value of target LO Frequency in 'kHz' unit - ex) 2.6GHz = 2600000 - -==============================================================================*/ -fc2580_fci_result_type fc2580_set_freq(void *pTuner, unsigned int f_lo, unsigned int freq_xtal ); - - -/*============================================================================== - fc2580 filter BW setting - - This function is a generic function which gets called to change Bandwidth - - frequency of fc2580's channel selection filter - - - - filter_bw - 1 : 1.53MHz(TDMB) - 6 : 6MHz - 7 : 7MHz - 8 : 7.8MHz - - -==============================================================================*/ -fc2580_fci_result_type fc2580_set_filter( void *pTuner, unsigned char filter_bw, unsigned int freq_xtal ); - -// The following context is FC2580 tuner API source code -// Definitions - -// AGC mode -enum FC2580_AGC_MODE -{ - FC2580_AGC_INTERNAL = 1, - FC2580_AGC_EXTERNAL = 2, -}; - - -// Bandwidth mode -enum FC2580_BANDWIDTH_MODE -{ - FC2580_BANDWIDTH_1530000HZ = 1, - FC2580_BANDWIDTH_6000000HZ = 6, - FC2580_BANDWIDTH_7000000HZ = 7, - FC2580_BANDWIDTH_8000000HZ = 8, -}; - -// Manipulaing functions -int -fc2580_Initialize( - void *pTuner - ); - -int -fc2580_SetRfFreqHz( - void *pTuner, - unsigned long RfFreqHz - ); - -// Extra manipulaing functions -int -fc2580_SetBandwidthMode( - void *pTuner, - int BandwidthMode - ); - -#endif diff --git a/include/tuner_r820t.h b/include/tuner_r820t.h deleted file mode 100644 index f9bd4cf..0000000 --- a/include/tuner_r820t.h +++ /dev/null @@ -1,196 +0,0 @@ -#ifndef _R820T_TUNER_H -#define _R820T_TUNER_H - -#define R820T_I2C_ADDR 0x34 -#define R820T_CHECK_ADDR 0x00 -#define R820T_CHECK_VAL 0x69 - -#define R820T_IF_FREQ 3570000 - -//*************************************************************** -//* INCLUDES.H -//*************************************************************** -#define VERSION "R820T_v1.49_ASTRO" -#define VER_NUM 49 - -#define USE_16M_XTAL FALSE -#define R828_Xtal 28800 - -#define USE_DIPLEXER FALSE -#define TUNER_CLK_OUT TRUE - -#ifndef _UINT_X_ -#define _UINT_X_ 1 -typedef unsigned char UINT8; -typedef unsigned short UINT16; -typedef unsigned int UINT32; -#endif - -#define TRUE 1 -#define FALSE 0 - -#define FUNCTION_SUCCESS 0 -#define FUNCTION_ERROR -1 - -typedef enum _R828_ErrCode -{ - RT_Success, - RT_Fail -}R828_ErrCode; - -typedef enum _Rafael_Chip_Type //Don't modify chip list -{ - R828 = 0, - R828D, - R828S, - R820T, - R820C, - R620D, - R620S -}Rafael_Chip_Type; -//----------------------------------------------------------// -// R828 Parameter // -//----------------------------------------------------------// - -extern UINT8 R828_ADDRESS; - -#define DIP_FREQ 320000 -#define IMR_TRIAL 9 -#define VCO_pwr_ref 0x02 - -extern UINT32 R828_IF_khz; -extern UINT32 R828_CAL_LO_khz; -extern UINT8 R828_IMR_point_num; -extern UINT8 R828_IMR_done_flag; -extern UINT8 Rafael_Chip; - -typedef enum _R828_Standard_Type //Don't remove standand list!! -{ - NTSC_MN = 0, - PAL_I, - PAL_DK, - PAL_B_7M, //no use - PAL_BGH_8M, //for PAL B/G, PAL G/H - SECAM_L, - SECAM_L1_INV, //for SECAM L' - SECAM_L1, //no use - ATV_SIZE, - DVB_T_6M = ATV_SIZE, - DVB_T_7M, - DVB_T_7M_2, - DVB_T_8M, - DVB_T2_6M, - DVB_T2_7M, - DVB_T2_7M_2, - DVB_T2_8M, - DVB_T2_1_7M, - DVB_T2_10M, - DVB_C_8M, - DVB_C_6M, - ISDB_T, - DTMB, - R828_ATSC, - FM, - STD_SIZE -}R828_Standard_Type; - -extern UINT8 R828_Fil_Cal_flag[STD_SIZE]; - -typedef enum _R828_SetFreq_Type -{ - FAST_MODE = TRUE, - NORMAL_MODE = FALSE -}R828_SetFreq_Type; - -typedef enum _R828_LoopThrough_Type -{ - LOOP_THROUGH = TRUE, - SIGLE_IN = FALSE -}R828_LoopThrough_Type; - - -typedef enum _R828_InputMode_Type -{ - AIR_IN = 0, - CABLE_IN_1, - CABLE_IN_2 -}R828_InputMode_Type; - -typedef enum _R828_IfAgc_Type -{ - IF_AGC1 = 0, - IF_AGC2 -}R828_IfAgc_Type; - -typedef enum _R828_GPIO_Type -{ - HI_SIG = TRUE, - LO_SIG = FALSE -}R828_GPIO_Type; - -typedef struct _R828_Set_Info -{ - UINT32 RF_Hz; - UINT32 RF_KHz; - R828_Standard_Type R828_Standard; - R828_LoopThrough_Type RT_Input; - R828_InputMode_Type RT_InputMode; - R828_IfAgc_Type R828_IfAgc_Select; -}R828_Set_Info; - -typedef struct _R828_RF_Gain_Info -{ - UINT8 RF_gain1; - UINT8 RF_gain2; - UINT8 RF_gain_comb; -}R828_RF_Gain_Info; - -typedef enum _R828_RF_Gain_TYPE -{ - RF_AUTO = 0, - RF_MANUAL -}R828_RF_Gain_TYPE; - -typedef struct _R828_I2C_LEN_TYPE -{ - UINT8 RegAddr; - UINT8 Data[50]; - UINT8 Len; -}R828_I2C_LEN_TYPE; - -typedef struct _R828_I2C_TYPE -{ - UINT8 RegAddr; - UINT8 Data; -}R828_I2C_TYPE; -//----------------------------------------------------------// -// R828 Function // -//----------------------------------------------------------// -R828_ErrCode R828_Init(void *pTuner); -R828_ErrCode R828_Standby(void *pTuner, R828_LoopThrough_Type R828_LoopSwitch); -R828_ErrCode R828_GPIO(void *pTuner, R828_GPIO_Type R828_GPIO_Conrl); -R828_ErrCode R828_SetStandard(void *pTuner, R828_Standard_Type RT_Standard); -R828_ErrCode R828_SetFrequency(void *pTuner, R828_Set_Info R828_INFO, R828_SetFreq_Type R828_SetFreqMode); -R828_ErrCode R828_GetRfGain(void *pTuner, R828_RF_Gain_Info *pR828_rf_gain); -R828_ErrCode R828_SetRfGain(void *pTuner, int gain); -R828_ErrCode R828_RfGainMode(void *pTuner, int manual); - -int -r820t_SetRfFreqHz( - void *pTuner, - unsigned long RfFreqHz - ); - -int -r820t_SetStandardMode( - void *pTuner, - int StandardMode - ); - -int -r820t_SetStandby( - void *pTuner, - int LoopThroughType - ); - -#endif /* _R820T_TUNER_H */ diff --git a/librtlsdr.pc.in b/librtlsdr.pc.in deleted file mode 100644 index 5e55049..0000000 --- a/librtlsdr.pc.in +++ /dev/null @@ -1,11 +0,0 @@ -prefix=@prefix@ -exec_prefix=@exec_prefix@ -libdir=@libdir@ -includedir=@includedir@ - -Name: RTL-SDR Library -Description: C Utility Library -Version: @VERSION@ -Cflags: -I${includedir}/ @RTLSDR_PC_CFLAGS@ -Libs: -L${libdir} -lrtlsdr -lusb-1.0 -Libs.private: @RTLSDR_PC_LIBS@ diff --git a/rtl-sdr.rules b/rtl-sdr.rules deleted file mode 100644 index 1f68c45..0000000 --- a/rtl-sdr.rules +++ /dev/null @@ -1,101 +0,0 @@ -# -# Copyright 2012 Osmocom rtl-sdr project -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# - -# original RTL2832U vid/pid (hama nano, for example) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="2832", MODE:="0666" - -# ezcap EzTV668 (E4000) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="2838", MODE:="0666" - -# Terratec Cinergy T Stick Black (rev 1) (FC0012) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0ccd", ATTRS{idProduct}=="00a9", MODE:="0666" - -# Terratec NOXON rev 1 (FC0013) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0ccd", ATTRS{idProduct}=="00b3", MODE:="0666" -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0ccd", ATTRS{idProduct}=="00b4", MODE:="0666" -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0ccd", ATTRS{idProduct}=="00b7", MODE:="0666" -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0ccd", ATTRS{idProduct}=="00c6", MODE:="0666" - -# Terratec Cinergy T Stick RC (Rev.3) (E4000) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0ccd", ATTRS{idProduct}=="00d3", MODE:="0666" - -# Terratec T Stick PLUS (E4000) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0ccd", ATTRS{idProduct}=="00d7", MODE:="0666" - -# Terratec NOXON rev 2 (E4000) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0ccd", ATTRS{idProduct}=="00e0", MODE:="0666" - -# PixelView PV-DT235U(RN) (FC0012) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1554", ATTRS{idProduct}=="5020", MODE:="0666" - -# Compro Videomate U620F (E4000) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="185b", ATTRS{idProduct}=="0620", MODE:="0666" - -# Compro Videomate U650F (E4000) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="185b", ATTRS{idProduct}=="0650", MODE:="0666" - -# Compro Videomate U680F (E4000) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="185b", ATTRS{idProduct}=="0680", MODE:="0666" - -# Sweex DVB-T USB (FC0012) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1f4d", ATTRS{idProduct}=="a803", MODE:="0666" - -# GTek T803 (FC0012) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1f4d", ATTRS{idProduct}=="b803", MODE:="0666" - -# Lifeview LV5TDeluxe (FC0012) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1f4d", ATTRS{idProduct}=="c803", MODE:="0666" - -# MyGica TD312 (FC0012) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1f4d", ATTRS{idProduct}=="d286", MODE:="0666" - -# PROlectrix DV107669 (FC0012) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1f4d", ATTRS{idProduct}=="d803", MODE:="0666" - -# Zaapa ZT-MINDVBZP (FC0012) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b80", ATTRS{idProduct}=="d398", MODE:="0666" - -# Twintech UT-40 (FC0013) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b80", ATTRS{idProduct}=="d3a4", MODE:="0666" - -# Dexatek DK DVB-T Dongle (Logilink VG0002A) (FC2580) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1d19", ATTRS{idProduct}=="1101", MODE:="0666" - -# Dexatek DK DVB-T Dongle (MSI DigiVox mini II V3.0) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1d19", ATTRS{idProduct}=="1102", MODE:="0666" - -# Dexatek DK 5217 DVB-T Dongle (FC2580) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1d19", ATTRS{idProduct}=="1103", MODE:="0666" - -# MSI DigiVox Micro HD (FC2580) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1d19", ATTRS{idProduct}=="1104", MODE:="0666" - -# Genius TVGo DVB-T03 USB dongle (Ver. B) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0458", ATTRS{idProduct}=="707f", MODE:="0666" - -# GIGABYTE GT-U7300 (FC0012) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b80", ATTRS{idProduct}=="d393", MODE:="0666" - -# DIKOM USB-DVBT HD -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b80", ATTRS{idProduct}=="d394", MODE:="0666" - -# Peak 102569AGPK (FC0012) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b80", ATTRS{idProduct}=="d395", MODE:="0666" - -# SVEON STV20 DVB-T USB & FM (FC0012) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b80", ATTRS{idProduct}=="d39d", MODE:="0666" -