X-Git-Url: https://git.rvb.name/rtl-433.git/blobdiff_plain/a3166201c6f1fa7e56c7e4b86083a42fffb0c568..c8df1ec0454217770b6fc24e676bc4cb8f6055ca:/README

diff --git a/README b/README
deleted file mode 100644
index acc298b..0000000
--- a/README
+++ /dev/null
@@ -1,31 +0,0 @@
-rtl_433, turns your Realtek RTL2832 based DVB dongle into a 433.92MHz generic data receiver
-======================================================================
-
-Installation instructions:
-
-cd rtl_433/
-mkdir build
-cd build
-cmake ../
-make
-
-
-Running:
-
-./rtl_433 -h
-
-Usage:  [-d device_index (default: 0)]
-    [-g gain (default: 0 for auto)]
-    [-a analyze mode, print a textual description of the signal]
-    [-l change the detection level used to determine pulses (0-32000) default 10000]
-    [-f change the receive frequency, default is 433.92MHz]
-    [-S force sync output (default: async)]
-    [-r read data from file instead of from a receiver]
-    filename (a '-' dumps samples to stdout)
-
-
-./rtl_433 -a will run in analyze mode and you will get a text log of the received signal.
-./rtl_433 -a file_name will save the demodulated signal in a file. The format of the file is 48kHz 16 bit samples.
-./rtl_433 will run the software in receive mode. Some sensor data can be receviced.
-
-This software is mostly useable for developers right now.