X-Git-Url: https://git.rvb.name/rtl-433.git/blobdiff_plain/337eb4ba945097205fbb6a3ca7912fb0697092d1..a3166201c6f1fa7e56c7e4b86083a42fffb0c568:/src/devices/lacrosse.c~ diff --git a/src/devices/lacrosse.c~ b/src/devices/lacrosse.c~ deleted file mode 100644 index 834354b..0000000 --- a/src/devices/lacrosse.c~ +++ /dev/null @@ -1,198 +0,0 @@ -/* LaCrosse TX Temperature and Humidity Sensors - * Tested: TX-7U and TX-6U (Temperature only) - * - * Not Tested but should work: TX-3, TX-4 - * - * Protocol Documentation: http://www.f6fbb.org/domo/sensors/tx3_th.php - * - * Message is 44 bits, 11 x 4 bit nybbles: - * - * [00] [cnt = 10] [type] [addr] [addr + parity] [v1] [v2] [v3] [iv1] [iv2] [check] - * - * Notes: - * - Zero Pulses are longer (1,400 uS High, 1,000 uS Low) = 2,400 uS - * - One Pulses are shorter ( 550 uS High, 1,000 uS Low) = 1,600 uS - * - Sensor id changes when the battery is changed - * - Values are BCD with one decimal place: vvv = 12.3 - * - Value is repeated integer only iv = 12 - * - Temperature is in Celsius with 50.0 added (to handle negative values) - * - There is a 4 bit checksum and a parity bit covering the three digit value - * - Parity check for TX-3 and TX-4 might be different. - * - Msg sent with one repeat after 30 mS - * - Temperature and humidity are sent as separate messages - * - Frequency for each sensor may be could be off by as much as 50-75 khz - */ - -#include "rtl_433.h" - -// buffer to hold localized timestamp YYYY-MM-DD HH:MM:SS -#define LOCAL_TIME_BUFLEN 32 - -void local_time_str(time_t time_secs, char *buf) { - time_t etime; - struct tm *tm_info; - - if (time_secs == 0) { - time(&etime); - } else { - etime = time_secs; - } - - tm_info = localtime(&etime); - - strftime(buf, LOCAL_TIME_BUFLEN, "%Y-%m-%d %H:%M:%S", tm_info); -} - -// Check for a valid LaCrosse Packet -// -// written for the version of pwm_p_decode() (OOK_PWM_P) -// pulse width detector with two anomalys: -// 1. bits are inverted -// 2. The first bit is discarded as a start bit -// -// If a fixed pulse width decoder is used this -// routine will need to be changed. -static int lacrossetx_detect(uint8_t *pRow, uint8_t *msg_nybbles) { - int i; - uint8_t rbyte_no, rbit_no, mnybble_no, mbit_no; - uint8_t bit, checksum, parity_bit, parity = 0; - - // Actual Packet should start with 0x0A and be 6 bytes - // actual message is 44 bit, 11 x 4 bit nybbles. - if ((pRow[0] & 0xFE) == 0x14 && pRow[6] == 0 && pRow[7] == 0) { - - for (i = 0; i < 11; i++) { - msg_nybbles[i] = 0; - } - - // Move nybbles into a byte array - // shifted by one to compensate for loss of first bit. - for (i = 0; i < 43; i++) { - rbyte_no = i / 8; - rbit_no = 7 - (i % 8); - mnybble_no = (i + 1) / 4; - mbit_no = 3 - ((i + 1) % 4); - bit = (pRow[rbyte_no] & (1 << rbit_no)) ? 1 : 0; - msg_nybbles[mnybble_no] |= (bit << mbit_no); - - // Check parity on three bytes of data value - // TX3U might calculate parity on all data including - // sensor id and redundant integer data - if (mnybble_no > 4 && mnybble_no < 8) { - parity += bit; - } - - // fprintf(stderr, "recv: [%d/%d] %d -> msg [%d/%d] %02x, Parity: %d %s\n", rbyte_no, rbit_no, - // bit, mnybble_no, mbit_no, msg_nybbles[mnybble_no], parity, - // ( mbit_no == 0 ) ? "\n" : "" ); - } - - parity_bit = msg_nybbles[4] & 0x01; - parity += parity_bit; - - // Validate Checksum (4 bits in last nybble) - checksum = 0; - for (i = 0; i < 10; i++) { - checksum = (checksum + msg_nybbles[i]) & 0x0F; - } - - // fprintf(stderr,"Parity: %d, parity bit %d, Good %d\n", parity, parity_bit, parity % 2); - - if (checksum == msg_nybbles[10] && (parity % 2 == 0)) { - return 1; - } else { - fprintf(stderr, - "LaCrosse Checksum/Parity error: %d != %d, Parity %d\n", - checksum, msg_nybbles[10], parity); - return 0; - } - } - - return 0; -} - -// LaCrosse TX-6u, TX-7u, Temperature and Humidity Sensors -// Temperature and Humidity are sent in different messages bursts. -static int lacrossetx_callback(uint8_t bb[BITBUF_ROWS][BITBUF_COLS], - int16_t bits_per_row[BITBUF_ROWS]) { - - int i, m, valid = 0; - uint8_t *buf; - uint8_t msg_nybbles[11]; - uint8_t sensor_id, msg_type, msg_len, msg_parity, msg_checksum; - int msg_value_int; - float msg_value = 0, temp_c = 0, temp_f = 0; - time_t time_now; - char time_str[25]; - - static float last_msg_value = 0.0; - static uint8_t last_sensor_id = 0; - static uint8_t last_msg_type = 0; - static time_t last_msg_time = 0; - - for (m = 0; m < BITBUF_ROWS; m++) { - valid = 0; - if (lacrossetx_detect(bb[m], msg_nybbles)) { - - msg_len = msg_nybbles[1]; - msg_type = msg_nybbles[2]; - sensor_id = (msg_nybbles[3] << 3) + (msg_nybbles[4] >> 1); - msg_parity = msg_nybbles[4] & 0x01; - msg_value = msg_nybbles[5] * 10 + msg_nybbles[6] - + msg_nybbles[7] / 10.0; - msg_value_int = msg_nybbles[8] * 10 + msg_nybbles[9]; - msg_checksum = msg_nybbles[10]; - - time(&time_now); - - // suppress duplicates - if (sensor_id == last_sensor_id && msg_type == last_msg_type - && last_msg_value == msg_value - && time_now - last_msg_time < 50) { - continue; - } - - local_time_str(time_now, time_str); - - switch (msg_type) { - case 0x00: - temp_c = msg_value - 50.0; - temp_f = temp_c * 1.8 + 32; - printf("SENSOR:TYPE=LACROSSE_TX,TIME=%s,ID=%02x,TEMP=%3.1f\n", - time_str, sensor_id, temp_c); - break; - - case 0x0E: - printf("SENSOR:TYPE=LACROSSE_TX,TIME=%s,ID=%02x,HUMIDITY=%3.1f\n", - time_str, sensor_id, msg_value); - break; - - default: - fprintf(stderr, - "%s LaCrosse Sensor %02x: Unknown Reading % 3.1f (%d)\n", - time_str, sensor_id, msg_value, msg_value_int); - } - - time(&last_msg_time); - last_msg_value = msg_value; - last_msg_type = msg_type; - last_sensor_id = sensor_id; - - } else { - return 0; - } - } - - if (debug_output) - debug_callback(bb, bits_per_row); - return 1; -} - -r_device lacrossetx = { -/* .id = */15, -/* .name = */"LaCrosse TX Temperature / Humidity Sensor", -/* .modulation = */OOK_PWM_P, -/* .short_limit = */238, -/* .long_limit = */750, -/* .reset_limit = */8000, -/* .json_callback = */&lacrossetx_callback, };