Cleaned files

[rtl-433.git] / src / devices / prologue.c~

diff --git a/src/devices/prologue.c~ b/src/devices/prologue.c~
deleted file mode 100644 (file)
index 3d652f6..0000000
--- a/src/devices/prologue.c~
+++ /dev/null
@@ -1,67 +0,0 @@
-/* Prologue sensor protocol
- *
- * the sensor sends 36 bits 7 times, before the first packet there is a pulse sent
- * the packets are pwm modulated
- *
- * the data is grouped in 9 nibles
- * [id0] [rid0] [rid1] [data0] [temp0] [temp1] [temp2] [humi0] [humi1]
- *
- * id0 is always 1001,9
- * rid is a random id that is generated when the sensor starts, could include battery status
- * the same batteries often generate the same id
- * data(3) is 0 the battery status, 1 ok, 0 low, first reading always say low
- * data(2) is 1 when the sensor sends a reading when pressing the button on the sensor
- * data(1,0)+1 forms the channel number that can be set by the sensor (1-3)
- * temp is 12 bit signed scaled by 10
- * humi0 is always 1100,c if no humidity sensor is available
- * humi1 is always 1100,c if no humidity sensor is available
- *
- * The sensor can be bought at Clas Ohlson
- */
-#include "rtl_433.h"
-
-static int prologue_callback(uint8_t bb[BITBUF_ROWS][BITBUF_COLS],int16_t bits_per_row[BITBUF_ROWS]) {
-    int rid;
-
-    int16_t temp2;
-
-    /* FIXME validate the received message better */
-    if (((bb[1][0]&0xF0) == 0x90 && (bb[2][0]&0xF0) == 0x90 && (bb[3][0]&0xF0) == 0x90 && (bb[4][0]&0xF0) == 0x90 &&
-        (bb[5][0]&0xF0) == 0x90 && (bb[6][0]&0xF0) == 0x90) ||
-        ((bb[1][0]&0xF0) == 0x50 && (bb[2][0]&0xF0) == 0x50 && (bb[3][0]&0xF0) == 0x50 && (bb[4][0]&0xF0) == 0x50) &&
-        (bb[1][3] == bb[2][3]) && (bb[1][4] == bb[2][4])) {
-
-        /* Prologue sensor */
-        temp2 = (int16_t)((uint16_t)(bb[1][2] << 8) | (bb[1][3]&0xF0));
-        temp2 = temp2 >> 4;
-        fprintf(stderr, "Sensor temperature event:\n");
-        fprintf(stderr, "protocol      = Prologue, %d bits\n",bits_per_row[1]);
-        fprintf(stderr, "button        = %d\n",bb[1][1]&0x04?1:0);
-        fprintf(stderr, "battery       = %s\n",bb[1][1]&0x08?"Ok":"Low");
-        fprintf(stderr, "temp          = %s%d.%d\n",temp2<0?"-":"",abs((int16_t)temp2/10),abs((int16_t)temp2%10));
-        fprintf(stderr, "humidity      = %d\n", ((bb[1][3]&0x0F)<<4)|(bb[1][4]>>4));
-        fprintf(stderr, "channel       = %d\n",(bb[1][1]&0x03)+1);
-        fprintf(stderr, "id            = %d\n",(bb[1][0]&0xF0)>>4);
-        rid = ((bb[1][0]&0x0F)<<4)|(bb[1][1]&0xF0)>>4;
-        fprintf(stderr, "rid           = %d\n", rid);
-        fprintf(stderr, "hrid          = %02x\n", rid);
-
-        fprintf(stderr, "%02x %02x %02x %02x %02x\n",bb[1][0],bb[1][1],bb[1][2],bb[1][3],bb[1][4]);
-
-        if (debug_output)
-            debug_callback(bb, bits_per_row);
-
-        return 1;
-    }
-    return 0;
-}
-
-r_device prologue = {
-    /* .id             = */ 2,
-    /* .name           = */ "Prologue Temperature Sensor",
-    /* .modulation     = */ OOK_PWM_D,
-    /* .short_limit    = */ 3500/4,
-    /* .long_limit     = */ 7000/4,
-    /* .reset_limit    = */ 15000/4,
-    /* .json_callback  = */ &prologue_callback,
-};